Shower Wall Tile – The tile in your shower cabin, more than anywhere else in the house, has to be installed correctly to prevent moisture from seeping into the walls. The process is similar to whether re-tiling an existing wall or tiling a new construction post with exposed nails. Choosing the well-glazed tiles (ceramic or porcelain are usually the best option. But properly sealed marble, slate or other natural stone can be used).
The floor of the shower does not have to be tiled before making the walls. But the shower tray (the cement structure inclined under the floor) must be complete. Ceramic tile shower ideas need a solid, motionless, waterproof stand. Line the post walls in the concrete slab, which is a very difficult version of waterproof plasterboard. If the walls are bare studs, use the 1/2 inch cement plate. If there is plaster or existing drywall, place a 1/4 inch sheet of cement panel over it. Using an electronic stud finder to locate the studs.
12 Picture Gallery: Correction Design of Stall Shower Wall Tile
Use glue and screws for carpenter’s drywall to secure the pieces in place. The adhesive mortar in a thin layer on the seams with a flat knife, which softens them. Bathroom tiles designs on the walls of the stop shower should be laid out from the bottom parts of the walls, in the center of the width of each wall. In this way, the cuts at both ends of each wall are the same. Put a vertical straight line in the center of the wall, from top to bottom, and the tile on each side of it.
This post topic: Bathroom Tile